Using it safely
General good practice for a laser cutter. Your induction covers the specifics for the machine at our shed.
- ✓Never leave it runningStay with the machine the whole time it is cutting. Fire is the real risk.
- ✓Only cut approved materialsSome materials give off toxic fumes or catch fire. Check the approved list first.
- ✓Run the fume extractionThe extractor must be on for every job, no exceptions.
- ✓Keep the lid closedThe cover stays down while cutting to contain the beam and sparks.
- ✓Know where the stop isLearn the emergency stop and the extinguisher before your first job.
- ✓Never work aloneThis is medium-risk gear, so at least one other inducted member must be in the workshop with you.
- ✓Unsure? Ask the Floor Management TeamAlways better to ask. They're happy to help and there's no silly question.
Before you start
An induction is required
Before using the laser cutter for the first time, you'll do a short, friendly hands-on induction with an experienced member. We'll walk you through setup, safe operation and how to stop safely, at your own pace.
Organise one with our Floor Management Team on any open day, or call the shed on 03 5750 1120. Already inducted? Remember the two-member rule still applies.