03 5750 1120 14 Churchill Ave, Bright VIC
Member Login
Join the Shed
A guide, not a substitute for your induction. These are general good-practice notes. Always follow your induction and the Floor Management Team's directions for this machine.
Video
The drill press at the Bright United Men's Shed
The drill press at the Bright United Men's Shed
1 / 3

Metalwork · Our Workshop

Drill press

Medium risk Induction required

The drill press gives accurate vertical holes in timber and metal. Straightforward and lower-risk, but still earns its respect.

  • Two-member rule
    Don't work alone on this one
  • Before you start
    Complete a drill press induction
Get inducted Back to the workshop

Using it safely

General good practice for a drill press. Your induction covers the specifics for the machine at our shed.

  • ✓Clamp the work, never hold itUse a vice or clamp. A grabbed piece can spin and cut your hand badly.
  • ✓No glovesLoose gloves can catch on the bit and pull your hand in.
  • ✓Remove the chuck keyTake it out before you power on, every time.
  • ✓Right speed for the materialSlower for metal, faster for timber. Ease the bit in, do not force it.
  • ✓Clear swarf with a brushBrush chips away once the bit has stopped.
  • ✓Unsure? Ask the Floor Management TeamAlways better to ask. They're happy to help and there's no silly question.

Before you start

An induction is required

Before using the drill press for the first time, you'll do a short, friendly hands-on induction with an experienced member. We'll walk you through setup, safe operation and how to stop safely, at your own pace.

Organise one with our Floor Management Team on any open day, or call the shed on 03 5750 1120. Already inducted? Remember the two-member rule still applies.