03 5750 1120 14 Churchill Ave, Bright VIC
Member Login
Join the Shed
A guide, not a substitute for your induction. These are general good-practice notes. Always follow your induction and the Floor Management Team's directions for this machine.
Video
The metal lathe at the Bright United Men's Shed
1 / 2

Metalwork · Our Workshop

Metal lathe

Medium risk Induction required

A metal lathe turns, faces and threads round metal stock to precise sizes. Patient, satisfying work and the heart of the metal bench.

  • Two-member rule
    Don't work alone on this one
  • Before you start
    Complete a metal lathe induction
Get inducted Back to the workshop

Using it safely

General good practice for a metal lathe. Your induction covers the specifics for the machine at our shed.

  • ✓Never wear glovesGloves and rotating chucks are a dangerous mix. Bare hands, no loose anything.
  • ✓Remove the chuck keyTake the key out the moment you have tightened the chuck. Every single time.
  • ✓Secure the workpieceMake sure the stock is held firmly and give it a hand-turn before powering on.
  • ✓Stand clear of swarfHot metal chips fly. Use a brush, never your hand, to clear them.
  • ✓Right speed for the jobSet the speed to suit the diameter and material. Start slow.
  • ✓Never work aloneThis is medium-risk gear, so at least one other inducted member must be in the workshop with you.
  • ✓Unsure? Ask the Floor Management TeamAlways better to ask. They're happy to help and there's no silly question.

Before you start

An induction is required

Before using the metal lathe for the first time, you'll do a short, friendly hands-on induction with an experienced member. We'll walk you through setup, safe operation and how to stop safely, at your own pace.

Organise one with our Floor Management Team on any open day, or call the shed on 03 5750 1120. Already inducted? Remember the two-member rule still applies.